Here are some of the latest fin designs and new color fins that we offer at true ames. You can see the whole collection of fins at trueames.com or download the latest catalog in pdf format.
________________________________________________________________
6.5” is all you get
In 1970, across the fertile planes of Oxnard, the Cambell brothers invented the unprecedented Bonzer design, and this rear-loading fin, available now in a Bamboo veneer super lite version, was its centerpiece. Make sure to also get the runners that complete the Bonzer configuration.
________________________________________________________________
A new variety of wooden fins are in stock now. Check out the Bamboo Burl, Bamboo Red Stripe, and the Classic Wood Stripe. See all of the templates ranging from Greenough 4-a to the Heritage and California Classic at trueames.com
________________________________________________________________
Bonzer Runners- Bamboo Truelite
front fins: base: 5.31” / 131 mm height: 2.75” / 71 mm
back fins: base: 4.75” / 121 mm height: 2.31”
________________________________________________________________
 Wilderness |
 Squirrel Cutaway |
 Yater Classic |
January 21st, 2010 at 12:22 am
Very stoked to see the new Bonzer Style fins (especially the hex center and side fins)! It would be even better if you could offer the side fins (Bonzer Runners) in FCS compatable versions and the hex center fin in the 7″ length.
Thanks for expanding the Bonzer options!
January 30th, 2010 at 12:23 am
As of right now we don’t offer the Bonzers in FCS compatible. We are working on hexcore 6′ and 7″ center fin so stay tuned. Thanks!
January 21st, 2010 at 11:07 pm
Hi Guys,
maybe you guys could help me find the right selection out of your amazing range of fins. Want to surf a 6’4” bear wombat eggy kind of shape as a thruster set-up (it has a fin box in the middle and fcs plugs for the side fins). Looking for tuning the board for tighter turns.
Thanks for your suggestions!
Cheers,
fab
January 30th, 2010 at 12:17 am
Hey Fabian, Thanks for coming to True Ames for fin advice. Your best bet to make that board high performance and good for tighter turns you want go with all 3 fins the same height in the 4.5″ to 4.75″ size. We offer”the smallbox fin in a variety of sizes. Then match up your FCS compatible side fins to the same size as your center fin… Another option is more like a mini longboard setup with a 6.5″ to 7″ center fin and smaller side fins in the 3.6o” range. Hope this helps!
May 16th, 2010 at 9:12 pm
Hi !
just wondering if you have any fcs compatible fins that are great for small people? like 50kg?
cheers and love your bamboo fins!
June 17th, 2010 at 10:34 pm
Your best bet is the Timmy Patterson Small FCS compatible fin This fin is a smaller version of a good all around fin, just a bit smaller. good luck
August 5th, 2010 at 12:19 am
looking for new fins for a 9’4″ stewart pin-pro. Current set up is a glass, standard sweep center fin with cheap future side bites. I was looking to replace with either a long thruster set up as that fits my style (using the longboard maninly for paddling, tend toward late take-offs and down the line speed), 4 3/4 or just updating the side bites with glass. Other option was to also replace center fin with your bamboo 6.5″, but that was sex appeal, not rational thought. Next question, do you or one of the retail shops in town (SB) let you demo your fins? Thanks for your help
siri atma